This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Sun 17 of Nov, 2019 [02:04 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->double keying crank blown 392

double keying crank blown 392

I was wondering if it is required to double key the 392 hemi crank 180 degrees apart if A BDS blower is being installed with 8psi boost or is it sufficient to have one long key in the stock location my builder says when he does a BBC he puts in 2 woodruf keys one behing the other

  user offline
on: Sun 16 of Aug, 2009 [03:14 UTC] reads: 12706

Posted messages

author message
Re: double keying crank blown 392
on: Thu 20 of Aug, 2009 [13:37 UTC] score: 0.00
> Wrench: Double keys are probably better but we run a single key even in our race engines but the Hot Heads key is about twice as long as the stock keys. Have fun, Bob Walker

Page: 1/1

Show posts: