This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Tue 10 of Dec, 2019 [13:41 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->392 Machine Work

vatopendeo
392 Machine Work


Hi everyone. New member here. I have a 392 I'm building which will be blown with a nice set of 331 heads. I live in Michigan and I'm trying to find a good competent machinist that is familiar with the early Hemi. There are lots of machine shops around but I want someone that that knows these motors and has a torque plate etc for the honing operation. The machine shop would not need to be in my state if he has all the knowledge and proper tools. I could either ship the parts or deliver and pick up in another state as long as it's not too far. If you know someone that fits that bill. Any help would be appreciated. Thanks

Craig
  user offline
on: Tue 03 of Apr, 2012 [14:47 UTC] reads: 15322

Posted messages

Top
author message
vatopendeo
user offline
Re: 392 Machine Work
on: Wed 04 of Apr, 2012 [18:07 UTC] score: 0.00
> Hi everyone. New member here. I have a 392 I'm building which will be blown with a nice set of 331 heads. I live in Michigan and I'm trying to find a good competent machinist that is familiar with the early Hemi. There are lots of machine shops around but I want someone that that knows these motors and has a torque plate etc for the honing operation. The machine shop would not need to be in my state if he has all the knowledge and proper tools. I could either ship the parts or deliver and pick up in another state as long as it's not too far. If you know someone that fits that bill. Any help would be appreciated. Thanks
>
> Craig

Thank you all for your responses. I will be contacting them. Very much appreciate the help!

Craig

author message
BOBF
user offline
Re: 392 Machine Work
on: Wed 04 of Apr, 2012 [13:22 UTC] score: 0.00
> Hi everyone. New member here. I have a 392 I'm building which will be blown with a nice set of 331 heads. I live in Michigan and I'm trying to find a good competent machinist that is familiar with the early Hemi. There are lots of machine shops around but I want someone that that knows these motors and has a torque plate etc for the honing operation. The machine shop would not need to be in my state if he has all the knowledge and proper tools. I could either ship the parts or deliver and pick up in another state as long as it's not too far. If you know someone that fits that bill. Any help would be appreciated. Thanks
>
> Craig

http://cdsengine.com/ Try this web site They have built 2 eng's for me, 1956 270 Dodge & 1989 351 W Ford. They are both good runners.
Bob F.

author message
dave331
user offline
Re: 392 Machine Work
on: Wed 04 of Apr, 2012 [12:16 UTC] score: 0.00
Hi I live in the UP michigan and I had my 331 Hemi built by
Engine Rebuilding Service out of sturgeon bay wis the owner and his son have did alot of the old Hemis and they ballance them too his name is George Schmelzer they build alot of race motors too they know !! phone # 1800-924-2548 or 1-920-825-1190 they are like 300 miles from me and they get the job done right i had other motors done by them no trouble my Brother too they were all just right !!! Have Fun Daveeek

author message
dave331
user offline
Re: 392 Machine Work
on: Wed 04 of Apr, 2012 [12:05 UTC] score: 0.00
> Hi everyone. New member here. I have a 392 I'm building which will be blown with a nice set of 331 heads. I live in Michigan and I'm trying to find a good competent machinist that is familiar with the early Hemi. There are lots of machine shops around but I want someone that that knows these motors and has a torque plate etc for the honing operation. The machine shop would not need to be in my state if he has all the knowledge and proper tools. I could either ship the parts or deliver and pick up in another state as long as it's not too far. If you know someone that fits that bill. Any help would be appreciated. Thanks
>
> Craig


Page: 1/1

Show posts: