This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Sun 08 of Dec, 2019 [02:47 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Remote oil filter

V8Juggernaut
Remote oil filter


Hello, I have a 291 Desoto that I am going to put into a '26 Ford Model T Tudor with a custom built frame. I am going to have a clearance issue with the stock oil filter housing. I need to move the filter location. I know Hot Heads sells a remote oil filter adaptor and remote filter mount. I am considering this as my only option.

Does anyone have any pictures of one of these installed on an engine? I am wondering how much space the adaptor takes up on the side of the block when installed. I am working with some pretty tight space constraints. Thanks for any help/pictures.
  user offline
on: Sun 02 of Mar, 2014 [23:37 UTC] reads: 16397

Posted messages

Top
author message
V8Juggernaut
user offline
Re: Remote oil filter
on: Sun 30 of Mar, 2014 [21:44 UTC] score: 0.00
Okay, so how does this adaptor attach to the 291 block? Stock, it has a single bolt thru the filter canister that holds everything fast to the block. This looks like it attaches with 4 bolts????? Or was this picture taken of an install on a Chrysler/Dodge block? I appreciate the help with this.

author message
George
user offline
Re: Re: Remote oil filter
on: Mon 31 of Mar, 2014 [00:59 UTC] score: 0.00
> Okay, so how does this adaptor attach to the 291 block? Stock, it has a single bolt thru the filter canister that holds everything fast to the block. This looks like it attaches with 4 bolts????? Or was this picture taken of an install on a Chrysler/Dodge block? I appreciate the help with this.

The single bolt holds the filter canister on. What it bolts into is attached to the block with 4 bolts.

author message
Re: Remote oil filter
on: Thu 06 of Mar, 2014 [13:13 UTC] score: 0.00
V8:
Here's one we're working on. The filter is located under the frame.
http://www.hothemiheads.com/images/20188.2.gif
Hope this helps,
Bob






> Hello, I have a 291 Desoto that I am going to put into a '26 Ford Model T Tudor with a custom built frame. I am going to have a clearance issue with the stock oil filter housing. I need to move the filter location. I know Hot Heads sells a remote oil filter adaptor and remote filter mount. I am considering this as my only option.
>
> Does anyone have any pictures of one of these installed on an engine? I am wondering how much space the adaptor takes up on the side of the block when installed. I am working with some pretty tight space constraints. Thanks for any help/pictures.


Page: 1/1

Show posts: