This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Thu 30 of Jun, 2022 [15:53 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->1612344 Mohawk Adapter

sgm41hemi
1612344 Mohawk Adapter


I got one of these adapters with my 56 354 and am not sure which transmission this will adapt to. Is it the stock setup for a 56 354 or is it something else?? Thanks
  user offline
on: Mon 01 of Dec, 2008 [16:58 UTC] reads: 27302

Posted messages

Top
author message
tirediron
user offline
Re: 1612344 Mohawk Adapter
on: Fri 11 of Sep, 2015 [23:13 UTC] score: 0.00
> attempting to adapt a 55-59 push button powerflite ro a 1953 red ram 241>

Whoops! My trans is a 55-59 Plymouth cast iron Torque Flite not a powerflite. I read somewhere thay if you use a powerflite bell housing it is a 1/4" deeper and requires the thinner 3/4" adapter? Got to learn to think while typing. To me thats multi-tasking and I'm age impaired! :-)


Bill

author message
tirediron
user offline
Re: 1612344 Mohawk Adapter
on: Fri 11 of Sep, 2015 [00:18 UTC] score: 0.00
> This is the stock Powerflite adapter for 55-56 Chrysler, DeSoto and Dodge and 54 Dodge after engine #80854

I am am attempting to adapt a 55-59 push button powerflite ro a 1953 Red Ram 241 but I have been confused by the variety of adapters and numbers and could not find a application reference. They seem to have varying thicknesses abt 7/8" or 1 1/8". your application mentions 54 dodge after #80854? Doea thay mean this will not worK for my applicatione and do you know which adapter number I need? Sure could use some advice as to how I might find out what to shop for?

…outnumbered in Nevada :-)
Bill

author message
George
user offline
Re: Re: 1612344 Mohawk Adapter
on: Fri 11 of Sep, 2015 [15:20 UTC] score: 0.00
> > This is the stock Powerflite adapter for 55-56 Chrysler, DeSoto and Dodge and 54 Dodge after engine #80854
>
> I am am attempting to adapt a 55-59 push button powerflite ro a 1953 Red Ram 241 but I have been confused by the variety of adapters and numbers and could not find a application reference. They seem to have varying thicknesses abt 7/8" or 1 1/8". your application mentions 54 dodge after #80854? Doea thay mean this will not worK for my applicatione and do you know which adapter number I need? Sure could use some advice as to how I might find out what to shop for?
>
> …outnumbered in Nevada :-)
> Bill
>
>
>
If it came off a Hemi, hemi based poly, or "A" Poly it would work, but you'd still have a 2 speed powerflite. Truly a shame that the 904 won't work. best off getting a 392 to 727 adaptor even though the 727 is a bit "big" for a 241

author message
bobcall
user offline
Re: 1612344 Mohawk Adapter
on: Tue 02 of Dec, 2008 [23:05 UTC] score: 0.00
Mike is correct. This is the stock Powerflite adapter for 55-56 Chrysler, DeSoto and Dodge and 54 Dodge after engine #80854

author message
NYer_Mike
user offline
Re: 1612344 Mohawk Adapter
on: Tue 02 of Dec, 2008 [21:41 UTC] score: 0.00
> I got one of these adapters with my 56 354 and am not sure which transmission this will adapt to. Is it the stock setup for a 56 354 or is it something else?? Thanks

It is a stock adapter plate for mounting a Powerfilte bellhousing.
Regards,
Mike


Page: 1/1

Show posts: