This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Tue 19 of Jun, 2018 [12:30 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->315 heads on 270

jgrady
315 heads on 270


Any issues with this,?? I have 270 and 241 heads, rust, wrecks, by the time I do anything might as well put on later heads / put work into them instead .

Scored reasonable Engle cam, unused, solids, had rockers convetted to small screws.

Thanks for thoghts .

Ps almost unbelievable, 325 Poly power Pack in 57 dodge I bought had manifold on 180 out, driven a lot of miles like that. Choke pot directly under linkage....it fits...
  user offline
on: Tue 05 of Dec, 2017 [19:57 UTC] reads: 2997

Posted messages

Top
author message
HotRod-1
user offline
Re: 315 heads on 270
on: Sat 03 of Feb, 2018 [18:07 UTC] score: 0.00
> Any issues with this,?? I have 270 and 241 heads, rust, wrecks, by the time I do anything might as well put on later heads / put work into them instead .
>
> Scored reasonable Engle cam, unused, solids, had rockers convetted to small screws.
>
> Thanks for thoghts .
>
> Ps almost unbelievable, 325 Poly power Pack in 57 dodge I bought had manifold on 180 out, driven a lot of miles like that. Choke pot directly under linkage....it fits...


Is the 270 block a Poly or a Hemi?

author message
George
user offline
Re: 315 heads on 270
on: Wed 06 of Dec, 2017 [15:45 UTC] score: 0.00
All the dodge heads will interchange. Some like the bigger ports & valves on the high deck heads, others like the higher port velocity of the low deck heads


Page: 1/1

Show posts: