This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Wed 25 of Apr, 2018 [20:07 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->advance cam timing

gyoder
advance cam timing


I have a 60 over 354 with 10:1- 392 pistons and isky solid lifter cam with 480 lift. I would like to advance cam timing 4 degrees, but wandering about piston to valve clearance. I hate to go to all the trouble of pulling a head then getting some clay to check. That's a lot of work for an old fart like me. So I was hoping someone has done this for me.
  user offline
on: Sat 14 of Apr, 2018 [00:59 UTC] reads: 152

Posted messages

Top

Page: 1/0

Show posts: