This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Mon 24 of Jun, 2019 [23:34 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->First time blower motor questions

AtomicTrent
First time blower motor questions


Looking for some basic timing advice for a mag fired 6-71 blown 392. This is a street driven car so don't need ragged edge timing, just want a good-safe baseline to go from. I am running less than 5lbs boost.
  user offline
on: Sun 26 of May, 2019 [20:59 UTC] reads: 540

Posted messages

Top
author message
hemihotrod
user offline
Re: First time blower motor questions
on: Thu 30 of May, 2019 [13:56 UTC] score: 0.00
I use 10 to 12 degrees initial timing and 30 degrees total all in by 2000 RPM..

author message
Webmaster
user offline
Re: First time blower motor questions
on: Thu 30 of May, 2019 [13:51 UTC] score: 0.00
Trent: Unless a dyno tells you it likes 31 or 29 better, set it on 30 degrees total.
Thanks for using the forum, Bob



> Looking for some basic timing advice for a mag fired 6-71 blown 392. This is a street driven car so don't need ragged edge timing, just want a good-safe baseline to go from. I am running less than 5lbs boost.


Page: 1/1

Show posts: