This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Mon 10 of Aug, 2020 [21:20 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Headers in an old Ford

Headers in an old Ford

I'm putting a 354 and 700R4 into a 1939 Ford. Has anyone used the 60020 full length headers for anything like this? (Ford frames are pretty much the same from 35-48.) The brake master cylinder mounted is mounted under the floor and there's an X-member that crosses behind the transmission tailshaft. I'm worried that the header collectors will be pointing at the master cylinder or an important part of the frame X.

  user offline
on: Tue 17 of Sep, 2019 [18:57 UTC] reads: 5974

Posted messages

author message
user offline
Re: Headers in an old Ford
on: Sat 21 of Sep, 2019 [03:44 UTC] score: 0.00
> I have a 392 in a 1934 Ford and use the Hot Heads long tube headers...They were originally designed to fit a 1934 Ford Roadster so you should have no issue...My car has under the floor pedals to...

Page: 1/1

Show posts: