This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Fri 16 of Nov, 2018 [09:43 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: Pulling spark plug tubes

moparruss
Re: Pulling spark plug tubes


Hot Heads also sells some pieces that you shrink fit into the spark plug tube holes in the head (machining required). Then the tube is sealed with an o-ring when you insert it. This keeps oil from seeping in between the tube and the head and "cokeing up", which makes the tubes really hard to remove. I installed these on my 341 Desoto when I did the heads and I highly recommend them.
  user offline
on: Thu 10 of May, 2018 [15:09 UTC] reads: 128

Posted messages

Top

Page: 1/0

Show posts: