This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Mon 24 of Jun, 2019 [23:40 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: Isky 392 Cam degreeing question

timfry
Re: Isky 392 Cam degreeing question


> I'm bolting together a 392 with stock cast piston replacements and a hyd Isky #3601 cam 485/280/232. It's going into a light streetrod with a HH Tunnel Ram 2x4's, 4-speed and 3.50 gears. When I degree the cam, should I try to achieve the same specs as the cam card or should it be advanced or retarded? Thanks!
>
> plenty of low end with this cam, no reason to advance.
  user offline
on: Sat 09 of Jun, 2018 [18:05 UTC] reads: 344

Posted messages

Top

Page: 1/0

Show posts: