This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Fri 20 of Sep, 2019 [12:14 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: Re: 392 exhaust valve stem seals

Re: Re: 392 exhaust valve stem seals

Oil is sucked down the ex. guides hard during overlap causing a rethinking of no exhaust seals. Perhaps you could use a Winona type spiral guide inert to oil the guides with seals This would allow min clearance with no galling of stem to guide. This ain't my first rodeo.
  user offline
on: Thu 21 of Feb, 2019 [18:54 UTC] reads: 236

Posted messages


Page: 1/0

Show posts: