This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Tue 22 of Oct, 2019 [16:09 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: T56 behind a Hemi

Webmaster
Re: T56 behind a Hemi


RS: A few years back, I bought a T-56 Magnum trans from the Keisler Bros. with a PO that specified it had to fit a '55 Chevy V8 bellhousing and have the throw out bearing installed. Keisler is out of business now. I had some trouble getting the correct Chevy bolt pattern but when the trans arrived, it was beautiful and everything I wanted. Using our Chevy manual trans adapter I had it installed in one evening.
The car and driver both enjoy traveling at 70 MPH @ 1,800 rpm.
Have fun,
Bob



> Been noticing a lot of T56 transmissions on the resell market. Had one in a Viper I used to own. Got to thinking, I thought I heard the V10 was just a 360 with two extra cylinders. If so would the bell housing be basically a small block bolt pattern and in turn work with one of Hothead's transmission adapters.
  user offline
on: Mon 04 of Mar, 2019 [20:02 UTC] reads: 253

Posted messages

Top

Page: 1/0

Show posts: