This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Mon 19 of Oct, 2020 [22:12 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: 1956 330 hemi conversion

Re: 1956 330 hemi conversion

I've used Chr 331s, not DeSotos, but they should be fairly similar. On a '48 Plym I used to have, with the long BB Chevy W/P, I moved the alt bracket forward by drilling a new hole in it and running a piece of plate back to the rear mount hole on the intake. That allowed the Alt pulley to line up with the crank, W/P, and P/S ones. Car had an early 70s Chevelle/Cutlass front clip to I used the HH P/S brackets & the GM P/S pump that was there from the pulled Olds 454.
  user offline
on: Thu 13 of Jun, 2019 [19:59 UTC] reads: 523

Posted messages


Page: 1/0

Show posts: