This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Thu 24 of Sep, 2020 [01:54 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: First time blower motor questions

bsgp8ntball
Re: First time blower motor questions


I know it's an old post but for archive searchers, I'm running a 354 stroked to 410cui with aluminum Hot Hemi Heads. 8.5static CR with a 6-71 pushing 12lbs. I run 26.5 (utra safe so I don't blow it up again) on the street and 31 at the track with race gas. The dyno didn't show any more power after 31.

> Looking for some basic timing advice for a mag fired 6-71 blown 392. This is a street driven car so don't need ragged edge timing, just want a good-safe baseline to go from. I am running less than 5lbs boost.
  user offline
on: Thu 25 of Jul, 2019 [16:04 UTC] reads: 351

Posted messages

Top

Page: 1/0

Show posts: