This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Thu 24 of Sep, 2020 [01:02 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: 392 build help

George
Re: 392 build help


I’m going naturally aspirated. I’d like to have a snappy street motor with great torque (2500-6000). I know I’ll have to put some new pistons (thinking 10:- or 10.5:1), hydraulic .505 cam. Already have msd ignition. I may get the hot heads aluminum heads but still deciding.

Apart from the HP question, 10:1 is a good CR for street cars, If you use alloy heads you'll need to bump it up 1 point to compensate for the better heat conductivity of the alloy. Ask Bob about the cam.
  user offline
on: Sun 18 of Aug, 2019 [18:15 UTC] reads: 379

Posted messages

Top

Page: 1/0

Show posts: