This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Fri 18 of Sep, 2020 [13:28 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: New 315/325 hemi rebuild

Re: New 315/325 hemi rebuild

You make it sound like you rotated the engine after adjusting the valves
If the configuration is that same as a 392 one would torque the heads before adjusting the valves.
Also make sure you have plenty of oil in the cylinders, I guess you could get some binding if the cylinders (rings) are dry. Did you fit the rings to the bore?
  user offline
on: Sun 08 of Dec, 2019 [15:24 UTC] reads: 280

Posted messages


Page: 1/0

Show posts: