This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Fri 18 of Sep, 2020 [14:31 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: Re: Re: New 315/325 hemi rebuild

George
Re: Re: Re: New 315/325 hemi rebuild


spin the oil pump and build pressure in the whole system and see what happens.



You need to do that before starting anyhow. Also (if hyd) lifters need to be pressurized before adjusting pushrods vs dry. When running O/P with drill motor have 1 person SLOWLY turning over the engine while the 2nd guy is running the drill. There are 2 places during the cycle that the rockers get oil. You'll hear a drop in tension when you get to each point. 1 place oils one side & the other side @ the other point.
  user offline
on: Fri 13 of Dec, 2019 [16:08 UTC] reads: 280

Posted messages

Top

Page: 1/0

Show posts: