This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Mon 06 of Apr, 2020 [05:38 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: Oil filler tube

Re: Oil filler tube

I'm finally getting the engine together and found that this is a problem.
291 Desoto with HH aluminum valley cover and HH aluminum 4 barrel intake.
The oil filler hole in the valley cover is covered by one of the intake runners.
I fixed the problem by milling a hole and tig welding a tube at about a 45 degree angle between the back two intake runners on the passenger side of the valley cover. I then joined a trick flow oil filler tube.
I also drilled and tapped for a pcv valve on the valley cover. Pcv valve from something like a 2003 Toyota is threaded on the valley side and has a 90 degree hose fitting. Finding the right pcv valve was about the hardest part.
  user offline
on: Tue 07 of Jan, 2020 [13:30 UTC] reads: 80

Posted messages


Page: 1/0

Show posts: