This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Tue 28 of Sep, 2021 [19:31 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: Nuts, Bolts & Washers

Re: Nuts, Bolts & Washers

Assuming the Dodge is similar to the Chr. The top row of valve covers use studs as does all (?) the exhaust mans. They go into oil or water so you don't want to use bolts there. If no complete kits go to hardware store & buy one of each bolt that looks like the right size, keeping each marked as to size so you know what they are. In case you don't know...The LA dizzy is a direct bolt in. The 241 has an advertised C/R of only 7-7.1:1, but one measured out at only 6.19:1!eek Forged 10:1 pistons is recomended.
  user offline
on: Mon 06 of Jul, 2020 [14:39 UTC] reads: 292

Posted messages


Page: 1/0

Show posts: