This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Fri 04 of Dec, 2020 [13:55 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: Re: Nuts, Bolts & Washers

jimshepard
Re: Re: Nuts, Bolts & Washers


> Assuming the Dodge is similar to the Chr. The top row of valve covers use studs as does all (?) the exhaust mans. They go into oil or water so you don't want to use bolts there. If no complete kits go to hardware store & buy one of each bolt that looks like the right size, keeping each marked as to size so you know what they are. In case you don't know...The LA dizzy is a direct bolt in. The 241 has an advertised C/R of only 7-7.1:1, but one measured out at only 6.19:1!eek Forged 10:1 pistons is recomended.

George, thanks. I was afraid I would have to spend a lot of time at the hardware store...
  user offline
on: Mon 06 of Jul, 2020 [18:49 UTC] reads: 150

Posted messages

Top

Page: 1/0

Show posts: