This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Thu 30 of Jun, 2022 [17:23 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Where can i find camshaft Id Numbers

341fury
Where can i find camshaft Id Numbers


Where can I find Camshaft ID numbers. I dont know what to look for on the cam. Also is there a website that has the ID numbers for Dodge, Chrysler and Desoto. Thanks
  user offline
on: Fri 27 of Feb, 2009 [02:32 UTC] reads: 24759

Posted messages

Top
author message
Re: Where can i find camshaft Id Numbers
on: Wed 04 of Mar, 2009 [12:23 UTC] score: 0.00
>341: Measuring from the back of the rear bearing boss to the front of the front bearing boss, excluding the snout, Dodge measures 20", DeSoto 20 3/8" and Chrysler is 21 3/8". This info is helpfull at the swap meets too. Have a Hemi day, Bob Walker

author message
341fury
user offline
Re: Where can i find camshaft Id Numbers
on: Mon 02 of Mar, 2009 [01:01 UTC] score: 0.00
There about 20.5 and 21.5

author message
Re: Where can i find camshaft Id Numbers
on: Sun 01 of Mar, 2009 [14:59 UTC] score: 0.00
> 341: I should have explained to measure from the back of the rear bearing boss to the front of the front bearing boss. Don't include the snout in your measurement. A threaded snout means '55 or older and drilled and tapped is '56 and newer. Thanks, Bob Walker

author message
Re: Where can i find camshaft Id Numbers
on: Sat 28 of Feb, 2009 [13:37 UTC] score: 0.00
> Where can I find Camshaft ID numbers.
What are the lengths of the cams?

author message
341fury
user offline
Re: Re: Where can i find camshaft Id Numbers
on: Sat 28 of Feb, 2009 [16:42 UTC] score: 0.00
Lengths are 21.5 and 23.5

author message
341fury
user offline
Re: Where can i find camshaft Id Numbers
on: Fri 27 of Feb, 2009 [23:19 UTC] score: 0.00
Ok did some research sounds like its an isky racing cam not sure if it is made for the desoto or not.

author message
341fury
user offline
Re: Where can i find camshaft Id Numbers
on: Fri 27 of Feb, 2009 [20:41 UTC] score: 0.00
I have 3 cams 2 are the same length and 1 is longer. I Can't seem to find enough numbers to make a complete ID number. On one of the cam ends it reads Iskenderian B7 09 DS E4. I believe what I have should be 2 Desoto Cams and one either dodge, or chrysler. Any help is appreciated. Thanks

author message
Re: Where can i find camshaft Id Numbers
on: Fri 27 of Feb, 2009 [12:25 UTC] score: 0.00
> Where can I find Camshaft ID numbers.

341Fury: Are you trying to determine what early hemi your cam came out of or what aftermarket grind you have? We can help! Bob Walker


Page: 1/1

Show posts: