This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Mon 06 of Apr, 2020 [05:07 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: Re: Re: Oil type/weight

George
Re: Re: Re: Oil type/weight


> I think a 10W-30 oil will be a good choice for street use. I've used 10W-30 Valvoline VR1 in two old Hemis with no problems. I get 60psi at cold idle, and 25psi at hot idle. > I don't think the .050" hole in the galley plug is needed for a street engine. The factory engines didn't have the hole, and they were quite reliable. If your engine already has the drilled plug, that's okay- the only result will be lower oil pressure at idle.
> Don't worry about sucking the pan dry- it won't happen.
>
> Good luck,
> Bill

I use 10W-40, with the plug drilled, & have the same oil pressure you do. I did have the dizzy gear on a Cleveland cam strip.
  user offline
on: Wed 20 of Apr, 2016 [03:19 UTC] reads: 835

Posted messages

Top

Page: 1/0

Show posts: