This is TikiWiki 1.9.7 -Sirius- © 2002–2006 by the Tiki community Fri 07 of May, 2021 [20:13 UTC]

Forum: Hot Heads Tech Talk

Forums->Hot Heads Tech Talk->Re: 331 hemi with backfiring problems

Webmaster
Re: 331 hemi with backfiring problems


Murbas: Sounds like you're running too fat. According to the calculations I use, your 338 at 6,000 rpm will wants 587 cfm. Try a smaller carb and see if that fixes it. Have fun, Bob






> i have a 331 hemi bored .040 over with 9 to 1 compression ratio, cam is an isky .485 lift 232 duration, 108 degree seperation, with dual holley 450cfm 4bbl's . headers are fenderwell exit with 3" collectors and baffles. car has a street/strip turbo 400 with a 3000 stall converter and 4.11 posi rear with 30" tall tires. i get backfiring occurring on ocasion under hard acceleration. can any help me with this problem ?
  user offline
on: Wed 07 of Apr, 2021 [16:42 UTC] reads: 20

Posted messages

Top

Page: 1/0

Show posts: